Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a Bulb on Land Rover Discovery

Model: Land Rover Discovery MK 4, LR4, Discovery 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

Open the hood and insert the prop rod. For safety, work with the ignition key off, the battery disconnected, and the parking brake engaged. Remove the four screws securing the top of the front bumper, then take it off. By pressing on the two plastic levers holding the headlamp, detach it. Disconnect the connector and, once on a workbench, simply remove the lower cover of the affected bulb and replace it: to do this, just pull out the bulb and insert the new one in its place.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

…
Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Next, we will see how to remove and replace the headlight bulb on the Land Rover Discovery, following the instructions below. First, open the hood of…
Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Today's procedure will guide you through the steps to remove and replace the headlight bulb on the Land Rover Discovery. First, open the hood and sta…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos