Do it yourself
| ||||
|
Land Rover Discovery - Video tutorial
Model: Land Rover Discovery
L318, Discovery 2, MK 2
- Years 1998-2004 To remove the bumper, start by unscrewing the three screws at the end of the bumper near the fender as shown in the images. Then you have to unscrew the screws at the bottom that hold the bulkhead inside the mudguard. The latter can be completely removed or left even partially mounted, the important thing is to have access to the bolts of the front bumper support. Continue by unscrewing another bolt only partially, always from the inside on the corner part of the bumper. It goes without saying that the operations carried out so far must also be repeated on the other side of the bumper. Finally, all that remains is to unscrew the three screws in the center of the bumper, always on the lower edge. Car model: Land Rover Discovery Year: 2000 Tools required: Phillips screwdriver, 10/13 mm socket wrenches
Posted on 8 September 2023 by ScegliAuto
How to remove the bumper of the Land Rover Discovery
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) We disassemble the front bumper of the Land Rover Discovery if it is damaged and replace it. Let's lift the bonnet and put it in safety. We remove th
Front bumper repair
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) If due to a collision the front bumper is damaged to the point of missing parts, the repair will involve a real reconstruction of the same; start by
Remove the Discovery Sport headlight
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) How to remove the headlight of the Land Rover Discovery? Let's see how the headlight is removed from above the front bumper. Let's start by removing Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |