Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of a Land Rover Discovery IV remote control

Model: Land Rover Discovery MK 4, LR4, Discovery 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
Video tutorial

In this video we can see how to change the battery of a remote control for a Land Rover Discovery version IV: keep in mind that the Land Rover remotes of this version are all the same on various models. They are keychains with five buttons with the code KOBJTf1OaaH2215K601. To open them, a small screwdriver will be sufficient, insert it into the slot, push down and release the tab. Now take the screwdriver again, insert it inside and lever it up gently until you can remove the battery housing.

This is a common CR2032 battery, which can be found in any supermarket or electronics store. To replace it, slide the new battery into the housing, paying attention to the polarity, slide it back into position and close the tab. Operation completed.


Posted on 8 July 2025 by ScegliAuto


Related tutorials

Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) The steps to replace the battery of the Land Rover Discovery remote control are: - remove the side metal cover of the remote control; - remove the em…
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) The following steps will show us the procedure for disassembling and replacing the battery of the key remote for the Land Rover Discovery. First, we …
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) In this tutorial, you will see how to replace the remote battery in a Land Rover Discovery 4. For this simple operation, you only need a replacement …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos