Do it yourself
| ||||
|
Land Rover Discovery - Headlight bulb
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
Replacement of the front headlight bulb of the Land Rover Discovery. Below we will see how to disassemble and replace the front headlight bulb of the Land Rover Discovery, following the instructions below. First, we open the …read all… Posted on 11 August 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
How to change the low beam of the Land Rover Discovery In this video we can see what are the steps to replace the headlight bulbs of the Land Rover Discovery. First we have to prepare all the necessary material …read all… Posted on 12 March 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Replacing the headlight bulbs of a Land Rover Discovery Do you want to replace the headlight bulbs of a Land Rover Discovery and don't know how to do it? Let's see how to proceed in the video guide: open the bonnet …read all… Posted on 28 October 2023 by ScegliAuto Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6) |
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |