Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Carburetor

Land Rover Discovery - Carburetor

Carburetor Land Rover Discovery (1998-2004 / l 318, discovery 2, mk 2)

Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
Clean the Throttle Body Without Removing It
If there are carburetion issues with fluctuations in engine RPM, it is necessary to clean the throttle body adjustment system. The first step is to loosen the …Read all…
Posted on 12 February 2026 by ScegliAuto
Airbag (1) Alternator (2) Speaker (1) Air conditioning (1) Car stereo (6) Battery (7) Transmission (4) Glow plugs (1) Carburetor (1) Body (1) Glove compartment (1) Key (16) Timing belt (10) V-belt (1) Onboard computer (1) Checks and maintenance (8) Dashboard (3) Differential (2) Headlight (4) Tail light (1) Air filter (2) Cabin air filter (4) Diesel fuel filter (5) Oil filter (3) Parking brake (2) Fuel injectors (1) Accessory kit (4) Light bulb (1) Side marker bulb (1) Headlight bulb (4) Tail light bulb (1) Antifreeze coolant (2) Instrument panel light (2) Transmission fluid (2) Engine oil (3) Clock (1) Door trim panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (5) Car door (2) Instrument cluster (2) Heater core (1) Fuse box (5) Seat (3) Door lock (1) Side mirror (1) AdBlue warning light (18) Warning light – error code (7) Tire pressure warning light (6) Service warning light (29) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) EGR valve (2) Blower motor (4) Steering wheel (6)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos