Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : -board computer

Land Rover Discovery - -board computer

Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
How to perform a service reset on a Land Rover Discovery 4
In this video tutorial we can see how it is possible to reset the service in a Land Rover Discovery 4, following a few simple steps: the first thing to do is …read all…
Posted on 14 October 2022 by ScegliAuto
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
How to reset the Land Rover Discovery AdBlue warning light
AdBlue is a special and innovative additive recently introduced in Diesel cars to allow a drastic reduction in pollution levels. After many kilometers it may …read all…
Posted on 19 July 2022 by ScegliAuto
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
How to perform a service reset on Land Rover Discovery
In this video tutorial we can see how the service reset is performed on Land Rover Discovery. The first thing to do will be to perform maintenance such as …read all…
Posted on 20 May 2022 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
How to reset the Land Rover Discovery service light
The service warning light is a simple reminder that reminds motorists of the need to carry out general maintenance on the vehicle after a certain number of …read all…
Posted on 3 April 2024 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos