Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Land Rover Discovery - Fuel pump

Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
How to replace the fuel pump in Land Rover Defender
In today's video we see how to disassemble and overhaul the fuel pump in the first series of the Land Rover Discovery. First of all, we recommend working …read all…
Posted on 5 April 2023 by ScegliAuto
Land Rover Discovery (1998-2004 / L318, Discovery2, MK 2)
How do I replace the fuel pump on Land Rover Discovery?
In order to replace the fuel pump of the Land Rover Discovery you have to go to open the tailgate, in order to have access to the luggage compartment. Here, …read all…
Posted on 28 March 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Land Rover Discovery Td5 diesel pump disassembly
In this video tutorial we will see how to disassemble the fuel pump of a Land Rover Discovery Td5. Then we proceed to remove the upper pipes that carry the …read all…
Posted on 16 December 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Fuel pump replacement on Land Rover Discovery
Land Rover Discovery's fuel pump no longer draws for fuel? Let's see how it disassembles. We lift the engine hood and secure it, then, we close the fuel access …read all…
Posted on 7 December 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos