Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement on Land Rover Discovery

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Fuel pump

Is the fuel pump on your Land Rover Discovery not drawing fuel anymore? Let's see how to remove it. Lift the hood and secure it, then tighten the fuel access to the engine. Use a socket wrench to remove the tank securing bolts. Take the tank out of its position. Disconnect the power connectors and the fluid circulation hoses. Finally, extract the fuel pump from inside the tank along with any attached parts. Install the new pump inside the tank (tighten the bolts and connect the power connectors). Reinstall the tank under the vehicle.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on the Land Rover Discovery TD5
Replacing the Fuel Pump on the Land Rover Discovery TD5
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) In this brief guide, you will find instructions to remove and replace the diesel fuel pump on the Land Rover Discovery TD5. First, open the rear hatc…
Removing Fuel Pump from Land Rover Discovery Td5
Removing Fuel Pump from Land Rover Discovery Td5
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) In this video tutorial, you will learn how to remove the fuel pump from a Land Rover Discovery Td5. First, remove the upper hoses that supply gasolin…
How to Replace the Fuel Pump on a Land Rover Discovery?
How to Replace the Fuel Pump on a Land Rover Discovery?
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) To replace the fuel pump on a Land Rover Discovery, open the rear hatch to access the cargo area. Lift the carpet covering the floor of the trunk to …

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos