|
Do it yourself
| |||
| ||||
Removing Water Pump from Land Rover Discovery 3.0 TDI
Model: Land Rover Discovery
MK 2, Discovery 2, L318
- Years 1998-2004
In this video tutorial, you will learn how to remove the water pump from a first-generation Land Rover Discovery. First, remove the timing belt and take off the first pulley attached to the pump. Next, unscrew the bolts from the cover, as shown in the video, and remove it. At this point, the fluid will obviously spill out, so clean everything before reinstalling the new gasket (very important)! Now you can reassemble all the components!
Updated on 20 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Land Rover Discovery
(2004-2010 /
MK 3, LR3, Discovery 3, L319)
In this video tutorial, you will learn how to remove the fuel pump from a Land Rover Discovery Td5. First, remove the upper hoses that supply gasolin…
Land Rover Discovery
(2010-2016 /
Discovery 4, MK 4, LR4)
The instructions illustrated in this guide will show us how to disassemble and replace the timing belt of the Land Rover Discovery 3.0 TDV6. In order…
…
Other guides you may be interested in
|
How to Replace the Cabin Filter on the Opel Grandland X
If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |