Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pump on a Land Rover Discovery?

Model: Land Rover Discovery MK 2, Discovery 2, L318 - Years 1998-2004
Part: Pump

To replace the brake pump on a Land Rover Discovery, open the hood to access the components in the engine compartment: the pump is located at the rear center, directly under the brake fluid reservoir. By removing the screws that secure the reservoir and taking it out completely, you can access the pump, which must be disconnected from the appropriate hoses and freed from the mounting screws. Once the pump is completely removed, install the new one, ensuring everything functions correctly.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) In this brief guide, you will find instructions to remove and replace the diesel fuel pump on the Land Rover Discovery TD5. First, open the rear hatc…
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) In this video tutorial, you will learn how to remove the fuel pump from a Land Rover Discovery Td5. First, remove the upper hoses that supply gasolin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos