Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How to replace the fuel pump in Land Rover Defender

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years 1998-2004
Part: Fuel pump
Operation: How to replace the fuel pump in Land Rover Defender

In today's video we see how to disassemble and overhaul the fuel pump in the first series of the Land Rover Discovery. First of all, we recommend working exclusively with a cold engine, to avoid unpleasant problems; then also place the car on level ground with the handbrake engaged. We then proceed by opening the tailgate and remove the trunk cover. At this point we access the fuel pump; disconnect the power connector and extract the component. Once this is done we can proceed to its revision and then to the reassembly of the component in its seat.


Posted on 5 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Discovery 1998-2004 - Where is the diesel pump located in the Land Rover Discovery 2? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos