Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : How to replace the diesel filter on Land Rover Discovery LR3-LR4

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 3, L319, MK 3, LR3 - Years 2004-2010
Part: Diesel filter
Operation: How to replace the diesel filter on Land Rover Discovery LR3-LR4

In this short guide we will find out how to remove and replace the diesel filter on Land Rover Discovery LR3 and LR4, third and fourth series, by following the instructions below. First of all, let's identify the position of the diesel filter; we find it under the engine, removing the metal bulkhead, as shown in the video. At this point we can unscrew our diesel filter, removing the clip; then we disconnect the diesel pipes and the electrical connector. We just have to replace it with the new one, applying the reverse procedure of disassembly!


Posted on 4 March 2024 by ScegliAuto



How to replace the diesel filter on Land Rover Discovery 3/4 3.0 TDV6
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Today we will see the main instructions on how to remove and replace the diesel filter on the fourth series Land Rover Discovery, with 3.0 TDV6 engin
Land Rover Discovery diesel filter disassembly
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video tutorial we will see how to remove and replace the diesel filter of a Land Rover Discovery TD6. First we open the bonnet and locate the
Land Rover Discovery Td5 diesel pump disassembly
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video tutorial we will see how to disassemble the fuel pump of a Land Rover Discovery Td5. Then we proceed to remove the upper pipes that car

    Frequently Asked Questions

    • Discovery 2010-2016 - Where is the Land Rover Discovery diesel filter located? Read Answer
    • Discovery 2004-2010 - Where is the Land Rover Discovery 2 diesel filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos