Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : Replacement fuel filter on Land Rover Discovery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 4, MK 4, LR4 - Years 2010-2016
Part: Diesel filter
Operation: Replacement fuel filter on Land Rover Discovery

Locate the diesel filter under the car, which is more or less halfway along the length of the vehicle: you can also see it in the video, it is an easily recognizable cartridge filter as it is usually white in color. The difficult part of this maintenance consists in disconnecting the two pipes that go to the filter itself. To do this, it is important to use special pliers to make your work easier. Unscrew the bolts that secure the filter to the rest of the car and remove it, remembering however that fuel will flow out of it, so prepare a container. Proceed backwards for reassembly.


Posted on 15 January 2024 by ScegliAuto



How to replace the diesel filter on Land Rover Discovery 3/4 3.0 TDV6
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Today we will see the main instructions on how to remove and replace the diesel filter on the fourth series Land Rover Discovery, with 3.0 TDV6 engin
Land Rover Discovery diesel filter disassembly
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video tutorial we will see how to remove and replace the diesel filter of a Land Rover Discovery TD6. First we open the bonnet and locate the
Fuel pump replacement on Land Rover Discovery
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) Land Rover Discovery's fuel pump no longer draws for fuel? Let's see how it disassembles. We lift the engine hood and secure it, then, we close the f

    Frequently Asked Questions

    • Discovery 2010-2016 - Where is the Land Rover Discovery diesel filter located? Read Answer
    • Discovery 2004-2010 - Where is the Land Rover Discovery 2 diesel filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos