Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How to replace the diesel filter on Land Rover Discovery 3/4 3.0 TDV6

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery MK 4, LR4, Discovery 4 - Years 2010-2016
Part: Diesel filter
Operation: How to replace the diesel filter on Land Rover Discovery 3/4 3.0 TDV6

Today we will see the main instructions on how to remove and replace the diesel filter on the fourth series Land Rover Discovery, with 3.0 TDV6 engine. First of all, let's find the diesel filter, which we find under the car; we then remove the metal bulkhead to access it. At this point we are going to unscrew our diesel filter, disconnecting the fuel pipes and the electrical connector of the sensor, as shown in the video. Once removed we can replace it with the new one; now we can mount the new diesel filter, following the video to the end!


Posted on 4 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Discovery 2010-2016 - Where is the Land Rover Discovery diesel filter located? Read Answer
    • Discovery 2004-2010 - Where is the Land Rover Discovery 2 diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos