Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Discovery
  6. : How to disassemble the EGR valve on the Land Rover Discovery 3 2.7 TDV6

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery MK 3, L319, LR3, Discovery 3 - Years 2004-2010
Part: EGR valve
Operation: How to disassemble the EGR valve on the Land Rover Discovery 3 2.7 TDV6

In today's video we will understand how to remove and replace the EGR valve, or simply clean it from encrustations, on the Land Rover Discovery third series with 2.7 TDV6 engine, in simple and quick steps. First we open the engine hood of our car and start by removing the upper engine protection; after which we disassemble the intake manifold and the exhaust gas pipes of the EGR valve, unscrewing the nuts. At this point we unscrew the screws of the EGR valve to remove it, disconnecting the electrical connector of the sensor; now we can clean or replace.


Posted on 8 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos