Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Door panel

Land Rover Discovery - Door panel

Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
How to disassemble the door panel of the Discovery
To remove the door of the Land Rover Discovery, we must follow a procedure with some rather simple and quick steps. We open the driver's door and remove the …read all…
Posted on 16 May 2024 by ScegliAuto
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery4)
How do you remove the door panel of the Land Rover Discovery?
In order to remove the door panel of the Land Rover Discovery, you need to use a tool to pry off the trim on the door handle and the one on the upper right …read all…
Posted on 19 August 2023 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Removing the front door panel on Land Rover Discovery 4
Let's see in this video how to remove the front door panel on a Land Rover Discovery 4, in simple and quick steps. First of all we open the front door and we …read all…
Posted on 28 January 2024 by ScegliAuto
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery5)
Land Rover Discovery door panel removal
Remove the screw cover located near the opening handle and unscrew the screw below. To the left of the handle there is a rectangular plastic: pry it off with a …read all…
Posted on 6 January 2024 by ScegliAuto
Land Rover Discovery (2004-2010 / MK 3, L319, LR3, Discovery3)
Removal of the door panel on Discovery
Let's see how to remove the cover panel from above the door of a Discovery. We disassemble the cover panel for replacement or maintenance inside. We disconnect …read all…
Posted on 27 December 2023 by ScegliAuto
Airbags (1) Alternator (2) Loudspeaker (1) Air conditioning (1) Car stereo (6) Battery (7) Gearbox (4) Glow plugs (1) Carburetor (1) Bodywork (1) Glove box (1) Key (9) Timing belt (8) V-belt (1) -board computer (4) Checks and maintenance (23) Dashboard (2) Differential (2) Headlight (4) Tail light (1) Air filter (1) Cabin air filter (4) Diesel filter (5) Oil filter (3) Hand brake (2) Injectors (1) Accessory Kit (4) Light bulb (1) Side turn signal light bulb (1) Headlight bulb (3) Rear light bulb (1) Antifreeze liquid (2) Dashboard light (3) Gear oil (2) Engine oil (1) Door panel (5) Front bumper (3) Brake pads (1) Hydraulic pistons (1) Pump (2) Fuel pump (4) Door (2) Instrument cluster (9) Fuse box (3) Seat (3) Lock (1) Windscreen wipers (3) Thermostat (1) Transmission (1) Turbine (1) EGR valve (2) Interior blower (4) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos