Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Land Rover Discovery?

Model: Land Rover Discovery Discovery 4, MK 4, LR4 - Years 2010-2016
Part: Door trim panel

To remove the door panel of the Land Rover Discovery, use a tool to pry off the trim pieces from the armrest and the upper right part of the panel. Once these are removed, you can loosen all the screws underneath, including those located in the lower center of the panel. After all screws are loosened, use a tool to pry the panel away from the door and detach it. This will allow you to install the new replacement part.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Door Panel on Land Rover Discovery 4
Removing Front Door Panel on Land Rover Discovery 4
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) In this video, you will learn how to remove the front door panel on a Land Rover Discovery 4 in simple and quick steps. First, open the front door an…
Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos