Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Torque Mount Bushes on the Hyundai i30

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Bushings

In this video, see how to replace the torque mount bushes on the Hyundai i30: these are rubber or polyurethane components that absorb engine vibrations and stabilise the movement of the driveshaft. Lift the car with a jack and position the axle stands, then remove the cover located under the engine. The mount is a metal arm connected to the engine and the chassis; undo the 3 bolts, with 1 on the engine side and 2 on the chassis side, and extract the old bushes (you may need a bit of force). You can find the new bushes on comarsport.com with the code KDT970-78 for £41.96 plus unspecified shipping costs: insert them ensuring they are oriented correctly, with the flat side facing outwards and the drainage hole facing down. Reposition the mount and tighten the bolts without fully securing them until all are aligned. The video clearly shows all the steps. The polyurethane bushes reduce vibrations but slightly increase cabin noise.

Posted on 23 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake of the 2010 Hyundai I30
How to adjust the handbrake of the 2010 Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) When it is necessary to adjust the handbrake of the 2010 Hyundai I30 model, we must first remove the cover located inside the cup holder. By lifting …
How to Replace the Rear Shock Absorbers on the Hyundai i30
How to Replace the Rear Shock Absorbers on the Hyundai i30
Hyundai I30 (2007-2012 / FD, MK 1) On the Hyundai i30, the work on the rear shock absorbers begins by securing the vehicle and lifting the rear with a jack. The video clearly shows the…
How to Change the Engine Air Filter in the Hyundai i30
How to Change the Engine Air Filter in the Hyundai i30
Hyundai I30 (2016-2024 / PD, MK 3) Replacing the engine air filter in your latest Hyundai i30 is very simple, and by following the steps in this guide, you can complete the task in jus…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos