Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to replace brake pads on Hyundai I30

Hyundai I30 - Video tutorial

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Brake pads
Operation: How to replace brake pads on Hyundai I30

Replace worn brake pads on our Hyundai I30? Let's see how they disassemble. We lift the car on a column bridge up to the desired height, immediately after we go to remove the rim (with a telescopic wrench) with the respective pins. We unscrew the locking pin of the brake caliper; we remove the caliper from above the disc. We remove the pads to be replaced from the wheel hub caliper. We mount the new pads on the caliper, mount the brake caliper with the holder on the disc. We tighten all the pins and mount the wheel and screw in the locking pins. We replace the pads of the other brakes.


Posted on 7 December 2023 by ScegliAuto



How to adjust the handbrake of the Hyundai I30.
Hyundai I30 (2011-2016 / MK 2, GD) In this video, we see how to adjust the handbrake of the Hyundai I30. It's a slightly different procedure compared to usual adjustments: we will star
Where is the OBD port located on the Hyundai I30?
Hyundai I30 (2016-2023 / PD, MK 3) If you own a 2021 Hyundai i30 and want to find out where the OBD port is located, which allows you to connect a professional diagnostic tool, then al
Hyundai I30 warranty services.
Hyundai I30 (2011-2016 / MK 2, GD) The Hyundai warranty (in the case of the video, the Hyundai I30 is mentioned) is a package that offers various assistance services that are valid for

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos