Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : Replacement of the key shell on the Hyundai I20 - I30 - Santa Fe

Hyundai I30 - Video tutorial

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Key
Operation: Replacement of the key shell on the Hyundai I20 - I30 - Santa Fe

In this video tutorial we will see how to remove and replace the key shell on the second series Hyundai I30, but also on the I20, Santa Fe and various Kia models. First of all, we take our remote control in hand and start by opening and separating our remote control into two parts; to make them we use a thin lever or pliers, as shown in the video. At this point we remove the electronic card, the key and the transponder chip; now we are going to transfer everything to the new shell, correctly assembling all the components: then follow the video to the end!


Posted on 29 February 2024 by ScegliAuto



How to replace the battery of the Hyundai I30 key.
Hyundai I30 (2011-2016 / MK 2, GD) .. for replacing the battery of the Hyundai I30 key is shown. To perform this procedure, first, you need to open the key in the opening mode. At..
How to replace the battery of the Hyundai i30 key remote control
Hyundai I30 (2016-2023 / PD, MK 3) .. show us how to replace the battery of the Hyundai I30 key remote. First, we take our remote and begin to remove the physical key from inside it; then..
How to reset the service light on the Hyundai I30?
Hyundai I30 (2011-2016 / MK 2, GD) On Hyundai models, the service light reset can occur automatically when the service is performed and a few kilometers have been driven. If this is no

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos