Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on the Hyundai i30

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Key

This video shows the procedure to replace the key battery on the Hyundai i30. To perform this procedure, first, open the key in the opening mode, then use a flat screwdriver to pry open the top part of the key shell, on the side where the logo is located. Once the shell is open, remove the top part, unscrew the two screws holding the battery cover, then remove the battery. After removing it, insert the new battery, replace the battery cover, and screw the screws back in before closing the key.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in a Hyundai i30
How to Replace the Key Battery in a Hyundai i30
Hyundai I30 (2011-2016 / MK 2, GD) Replacing the battery in your Hyundai i30 key (2011-2016) is one of the simplest tasks you can easily do yourself. With this mini guide, just follow …
How to Replace the Key Battery in a Hyundai I30
How to Replace the Key Battery in a Hyundai I30
Hyundai I30 (2016-2024 / PD, MK 3) To replace the key battery in a 2018 Hyundai I30, you will first need a new CR2032 button battery, which can be easily found at an electronics store …
How to Replace the Key Battery on Hyundai i30 2018
How to Replace the Key Battery on Hyundai i30 2018
Hyundai I30 (2016-2024 / PD, MK 3) To replace the battery located inside your Hyundai i30 key (2018 model), simply read the following guide and apply what is described. Before starting…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos