Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Dashboard and Radio on Land Rover Discovery 3

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

Remove the radio trim by pulling it off by hand, starting from the bottom as shown in the video. It is integrated with the center air vents.

This way, you have freed all the screws needed to secure the radio, so if you intend to remove or replace it, just take out the screws and pull it from its location. While pulling it out, remember that there are connectors and the antenna cable connected at the back, so disconnect them before fully removing the radio.

For reassembly, proceed in reverse order: connect the cables, insert the radio, and screw in the screws.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing Car Stereo from Land Rover Discovery
Removing Car Stereo from Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Is the stereo in your Land Rover due for replacement? Let's see how to remove it from a Discovery. Remove the stereo using metal release keys (where …
Remove Car Stereo from Land Rover Discovery
Remove Car Stereo from Land Rover Discovery
Land Rover Discovery (2004-2010 / LR3, L319, Discovery 3, MK 3) Is the stereo in your Land Rover Discovery damaged? Let's see how to remove it from the dashboard. Remove the stereo trim using a plastic pry tool (w…
How to Remove the Center Dashboard of a Land Rover Discovery
How to Remove the Center Dashboard of a Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Before you can start, sit in the driver's seat of your Land Rover Discovery. Begin by removing everything from the upper glove compartment located be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos