Do it yourself
Frequently asked questions about cars and motorcycles

Car Stereo Removal Instructions

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Car stereo

Before proceeding with the removal of the factory car stereo, ensure you have the unlock code needed for reactivation. To extract the original stereo from its location, you need special extraction keys: these are two thin metal strips that, when inserted into the slots at the upper corners of the stereo with the notches facing inward, allow you to release the stereo's retaining springs and then pull it out to disconnect the plugs and antennas.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) Is the stereo in your Land Rover due for replacement? Let's see how to remove it from a Discovery. Remove the stereo using metal release keys (where …
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) Is the stereo in your Land Rover Discovery damaged? Let's see how to remove it from the dashboard. Remove the stereo trim using a plastic pry tool (w…
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) Remove the two side plastic covers of the radio, attached to the air vents, by pulling them from the bottom, as shown in the video. Using a T20 Torx …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos