Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Motor on a Land Rover Discovery?

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Windshield wipers

See other generations:
Video tutorial

To replace the windshield wiper motor on a Land Rover Discovery 2, open the hood to access the engine compartment and detach the grille located just below the windshield. Once removed, loosen all the bolts securing the pivot arms connected to the motor.

The motor can then be extracted from its housing and removed after disconnecting the connector. Once the old motor is removed, install the new part: connect it to the connector and the pivot arms, and insert it back into its housing.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…
Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos