Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How do you replace the cabin filter on Land Rover Discovery?

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L462, MK 5, Discovery 5 - Years 2017-2023
Part: Cabin air filter
Operation: How do you replace the cabin filter on Land Rover Discovery?

In order to replace the cabin filter on the Land Rover Discovery, you need to remove the protective panel located between the footrest compartment on the front passenger side and the corresponding glove box: once this panel has been removed, it will be possible to identify the filter box on the left side. It will be necessary to remove the cover and then remove the underlying cabin filter. The latter can now be replaced with a new spare part; once the new filter has been inserted, the panel can be mounted again.


Posted on 3 April 2023 by ScegliAuto



Where is the OBD port located on the 2016 Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your Land Rover Discovery fourth series (year 2016) is really simple, and thanks to the following guide, it will literally ta
How to replace the diesel filter on Land Rover Discovery 3/4 3.0 TDV6
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Today we will see the main instructions on how to remove and replace the diesel filter on the fourth series Land Rover Discovery, with 3.0 TDV6 engin
Land Rover Discovery diesel filter disassembly
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) In this video tutorial we will see how to remove and replace the diesel filter of a Land Rover Discovery TD6. First we open the bonnet and locate the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos