Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Land Rover Discovery?

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
This video is currently unavailable

To replace the cabin fan in a Land Rover Discovery, open the glove compartment on the passenger side to access the internal mounting clips. Completely disengage these clips to access the components behind them: the cabin fan is located here.

Remove the fan from its housing by unscrewing the mounting screws and disconnecting the appropriate connectors. This will allow you to fully remove the old fan and replace it with a new one.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
How to Replace the Timing Chain in a Land Rover Discovery?
How to Replace the Timing Chain in a Land Rover Discovery?
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) To replace the timing chain in a Land Rover Discovery, you need to loosen the sprockets located on the left side of the engine block. This will reduc…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos