Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Land Rover Discovery 3

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Air filter

To learn how to correctly replace the air filter on your Land Rover Discovery 3 (2004-2010), read this guide carefully and follow the steps described. First, turn off the vehicle and lift the hood. Locate the air filter box on the lower left side of the engine compartment and remove the screws from the cover. Once done, take off the cover and proceed to replace the old filter with the new one. Finally, reinstall the cover.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Land Rover Discovery 3
How to replace the air filter of the Land Rover Discovery 3
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) If you own a Land Rover Discovery Mk3 and want to replace the engine air filter yourself, all you have to do is follow the procedure described in our…
Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos