Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tailgate switch in the Land Rover Discovery?

Model: Land Rover Discovery MK 3, LR3, Discovery 3, L319 - Years 2004-2010
Part: Checks and maintenance

In this tutorial, you will see how to replace the tailgate switch in the Land Rover Discovery 3, a very simple operation. If the tailgate is stuck and the switch is broken, open it by pressing and holding the two buttons to the right of the hazard light button for 3 seconds, then locate the switch in question and, using a flathead screwdriver, pry it out of the housing. Next, cut the two wires, strip them, and connect them to the replacement wires. You can either solder them or use simple connectors. Finally, reinsert the switch into the housing.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Tailgate of a Land Rover Discovery
How to Open the Tailgate of a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Let's see how to automatically open the rear tailgate of a Land Rover Discovery. Take the remote control with the open and close buttons (the trunk r…
How to Open the Tailgate on a Land Rover Discovery 3
How to Open the Tailgate on a Land Rover Discovery 3
Land Rover Discovery (2004-2010 / MK 3, LR3, Discovery 3, L319) In this video, see how to automatically open the tailgate of a Land Rover Discovery 3. This is a very simple operation: take the vehicle's remote key…
How to Replace the Rear Differential on a Land Rover Discovery
How to Replace the Rear Differential on a Land Rover Discovery
Land Rover Discovery (1998-2004 / MK 2, Discovery 2, L318) Today's guide will show you the main instructions on how to remove and replace the rear differential on a Land Rover Discovery. First, lift the vehic…

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos