Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the engine air filter in a Lexus IS

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

To change the engine air filter in a Lexus IS 2, turn off the engine and open the bonnet. Locate the filter box on the passenger side of the engine bay and remove the intake cover by releasing the three pressure clips and the plastic fastening.

Then lift the airbox cover and unclip the four metal clips holding it in place. If necessary, disconnect the airflow sensor connector and loosen the intake duct clamp to move the cover.

Remove the old air filter from the box and clean the inside of the housing. Insert the new filter in the same position and ensure the seal fits correctly around the entire edge.

Close the airbox, secure all clips, and reconnect any disconnected connectors and hoses. Finally, reattach the intake cover and check that all fastenings are secure before closing the bonnet.


Posted on 5 October 2026 by ScegliAuto


Related tutorials

Lexus IS (2005-2013 / MK 2) If you are wondering how to replace the air filter in your Lexus IS 250 Mk2 (2007), read this guide carefully and follow the described steps. First, …
Lexus IS (2013-2024 / MK 3) In today's video tutorial, we will go through the necessary instructions for removing and replacing the cabin air filter on a Lexus IS, following the…
Lexus IS (2005-2013 / MK 2) The cabin air filter is located inside the glove compartment on the passenger side: once you open the flap, remove the shelf inside the glove compart…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light on the Toyota RAV 4

Today, discover the guide that will allow you to reset the tyre pressure warning light on the Toyota RAV 4; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; navigate to the vehicle settings and then to the TPMS option, as shown in the video. At this point, reset the warning light by confirming with the OK button; this will automatically reset the TPMS light on the instrument panel!

Watch the video!


by ScegliAuto

More videos