Do it yourself
| ||||
|
Lexus RH - Video tutorial
Model: Lexus RH
Xu30, MK 2
- Years 2003-2008 Today we will see how to remove and replace the remote key battery on the Lexus RH and RX. First we take our remote control and start by removing the screw that we find near the key, using a Phillips screwdriver; after which we remove the cover of the remote control, in order to access the battery, as shown in the video. At this point we remove and replace the battery with the new one, of the right type (in this case a 3V CR 2016); we just have to insert it in the correct direction and reassemble everything, re-assembling the remote control shells!
Posted on 20 April 2024 by ScegliAuto
Other guides that may interest you |
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |