Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Lexus LS MK 4 - Years 2007-2017
Part: Accessory kit

Installing LED lights will give the vehicle a much more modern and appealing look while improving visibility; you can purchase aftermarket kits specifically designed for your car model, containing the correct number of bulbs with the respective fittings; indeed, those shown in the video do not require polarity to be observed; at this point, remove the old bulbs and insert the new ones, taking care to open the bulb holders with a plastic spatula; only for the rear light bulbs is it necessary to remove the cover of the tailgate, and for the passenger side scuff plate lights, you need to remove the plastic cover under the glove compartment.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Lexus LS (2000-2006 / MK 3, Xf30) The cabin air filter is located on the passenger side, behind the glove compartment: to replace it, open the glove compartment, remove the plastic co…
How do you replace the cabin filter in a Lexus LS?
How do you replace the cabin filter in a Lexus LS?
Lexus LS (2007-2017 / MK 4) It will be possible to replace the cabin filter of the Lexus LS by opening the glove compartment located on the passenger side. Once it is opened, yo…
Amplifier Disassembly Instructions
Amplifier Disassembly Instructions
Lexus LS (2006-2017 / ) The radio amplifier is located in the rear boot, on the right side, under the floor: remove the side carpet trim to access the amplifier's location; …

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos