Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Amplifier Disassembly Instructions

Model: Lexus LS - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

The radio amplifier is located in the rear boot, on the right side, under the floor: remove the side carpet trim to access the amplifier's location; then unscrew the screws that secure the amplifier to the floor and lift it from its position to have enough space to disconnect the plugs connected to it. Once the amplifier is removed, repairs can be carried out (usually it involves the output transistors which are easily available and can be replaced by a skilled technician) and then reverse the process for installation.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Removing the Power Steering Motor of Fiat Punto
Removing the Power Steering Motor of Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will see instructions on how to remove the power steering motor of a Fiat Punto second series. First, access the inside o…
Guide to disassembling the electric power steering column of the Nissan Micra
Guide to disassembling the electric power steering column of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide, we will see the main instructions on how to disassemble and replace the electric power steering column of the Nissan Micra. First, let…
Replacing the Electric Power Steering Motor on the BMW 1 Series
Replacing the Electric Power Steering Motor on the BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) The instructions in this guide will show you how to remove and replace the electric power steering motor on the BMW 1 Series. First, raise the vehicl…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos