Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Nautilus
    4. : Checks and maintenance

Lincoln Nautilus - Checks and maintenance

Lincoln Nautilus (2019-2024 / MK 1)
How to reset the oil service on a Lincoln Nautilus?
In this tutorial we can see how to reset the oil service in the Lincoln Nautilus, a very simple operation to be carried out only after completing all the …read all…
Posted on 8 May 2023 by ScegliAuto
Lincoln Nautilus (2019-2024 / MK 1)
How do you open the hood of the Lincoln Nautilus?
To be able to open the bonnet of the Lincoln Nautilus you have to go inside the passenger compartment, on the driver's side: in the lower left area with …read all…
Posted on 24 April 2023 by ScegliAuto
Lincoln Nautilus (2019-2024 / MK 1)
How to deactivate the automatic Start & Stop of the Lincoln Nautilus
Today we will see, in this short and simple guide, how to disable the automatic Start & Stop function of the Lincoln Nautilus, following the instructions …read all…
Posted on 30 July 2022 by ScegliAuto
Airbags (1) Battery (1) Checks and maintenance (3) Cabin air filter (1) Headlight bulb (1) Engine oil (1) Door panel (1) Instrument cluster (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos