Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the ignition switch of the LML Star 125?

Model: Lml Star 125
Part: Door lock

Video tutorial

It will be possible to replace the ignition switch of the LML Star 125 by loosening the screws that fasten the inner covering panel of the front shield of the motorcycle: once this panel has been removed from its seat, it will be possible to access the screws that fasten the switch to its seat so that it can be removed.

Then it will also be necessary to disconnect the corresponding connectors in order to remove it in order to insert the new switch: once this has been inserted, it will be possible to fasten it with the screws and connect it to verify that everything works correctly.


Posted on 2 July 2025 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Engine Mounts on a Piaggio Vespa PX 125 - LML Star 125
How to Replace the Engine Mounts on a Piaggio Vespa PX 125 - LML Star 125
Star 125 This guide provides instructions for removing and replacing the engine mounts or silent blocks on the Piaggio Vespa PX 125 and LML Star 125. To repla…
How to Replace the Starter Motor on the LML Star 125
How to Replace the Starter Motor on the LML Star 125
Star 125 Today's guide will illustrate the main steps to dismantle and replace the starter motor on the LML Star 125, as well as the Piaggio Vespa PX 125. Fir…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos