Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Lml
    3. : 200 4t

Removing Spark Plug on LML 200 4T

Model: Lml 200 4t
Part: Spark plugs

Video tutorial

In this video tutorial, you will see how to remove and replace the spark plug of an LML 200 four-stroke engine; the replacement procedure is very simple and requires only a socket wrench or the specific spark plug tool. First, remove the cap located on top of the engine's plastic cover; then use the wrench to unscrew the spark plug, finishing by hand.

Next, insert the new spark plug, screwing it in by hand before tightening with the wrench; finally, reinsert the cap and check its operation by starting the vehicle!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to perform a service on the LML Star 200 4t
How to perform a service on the LML Star 200 4t
200 4t This guide shows how to carry out the service check on the LML Star 200 4t. After removing the left grille, first check the air filter; it is located…

How to Dismantle the Engine of the Derbi DRD 125?

To replace the engine of the Derbi DRD 125, you need to completely remove the block from its housing by unscrewing the screws that secure it to its mounts and disconnecting all the power cables of the respective sensors. Then, proceed by unscrewing the screws that hold the cylinder, removing it completely, and also dismantling the piston contained within, removing the corresponding ring that secures it to the conrod. By also detaching the two side casings, you will gain access to the underlying components, which can be replaced with new spare parts if necessary.

Watch the video!


by ScegliAuto

More videos