Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Lml
    3. : Star 50
It is recommended to use synthetic oil for engines 10W-30. Unscrew the bolt that serves as the cap for the drainage hole of the gearbox and collect the used oil in a container of your choice. Properly dispose of the used oil. Check that the seal on the cap is still intact and not too damaged; if it is, replace it. Plug the drainage hole and screw the bolt back in securely. Obtain an oil filler tool that is less than 6 mm, as this is the diameter of the filling hole (a small funnel or a syringe). Insert the new lubricant.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Star 125 Today, in this brief and simple guide, follow the steps to perform the routine maintenance service by replacing the gearbox oil of the Lml Star 125, …
How to Replace the Engine Mounts on a Piaggio Vespa PX 125 - LML Star 125
How to Replace the Engine Mounts on a Piaggio Vespa PX 125 - LML Star 125
Star 125 This guide provides instructions for removing and replacing the engine mounts or silent blocks on the Piaggio Vespa PX 125 and LML Star 125. To repla…
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this brief and simple guide, you will learn how to replace the transmission oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke.…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos