Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil in the Beta Xtrainer?

Model: Beta Xtrainer
Part: Engine oil

Video tutorial

To perform the oil change on the Beta Xtrainer's motor oil, you need to loosen the drain plug located in the central bottom part of the vehicle: once it's unscrewed, you can let all the used oil flow into a properly positioned container. Once all the oil has drained out, you can close the drain plug again: this way you can top up by adding the necessary amount of oil from the breather located on the right side of the bike.


Posted on 21 January 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Beta Xtrainer?
How to Change the Engine Oil on the Beta Xtrainer?
Xtrainer You can change the engine oil on the Beta Xtrainer by unscrewing the drain plug from the oil sump located at the lower central part of the bike: once…
How to Change the Engine Oil on a Beta Xtrainer
How to Change the Engine Oil on a Beta Xtrainer
Xtrainer To change the engine oil on the Beta Xtrainer, loosen the drain plug located at the bottom of the bike in the central position. Unscrewing this plug …
How to Change the Gear Oil on the Beta Xtrainer?
How to Change the Gear Oil on the Beta Xtrainer?
Xtrainer To change the gear oil on the Beta Xtrainer, loosen the drain plug on the transmission casing, located at the lower rear of the bike. Once this plug …

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos