Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star 125
Part: Engine

In today's tutorial, you will learn how to remove the engine block from the frame of the Lml Star 125, as well as the Piaggio Vespa PX. First, place the central stand and start by removing the side panel of the engine; then disconnect all the cables, removing the clutch and gearbox cables as shown in the video. At this point, disconnect the carburettor from the engine by removing the fuel hose and the throttle cable; then unscrew the suspension pin and the longitudinal bolt of the engine, thus removing the engine from the bodywork!

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Exhaust on the Piaggio Vespa PX 125 - LML Star 125
Star 125 .. the exhaust on the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and begin unscrewing the exhaust bolt connected to the.. …
How to solve starting problems on the LML Star 125 - Piaggio Vespa PX 125
How to solve starting problems on the LML Star 125 - Piaggio Vespa PX 125
Star 125 .. problems related to electrical factors on the LML Star 125, but also on the Piaggio Vespa PX 125. On the new versions there is the battery, as the.. …
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Replace the Gearbox Oil of the Lml Star 125 - Piaggio Vespa PX 125
Star 125 .. service by replacing the gearbox oil of the Lml Star 125, as well as the Piaggio Vespa PX 125. First, place the central stand and start unscrewing.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos