Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the seat position of the Lynkeco adjusted?

Model: LYNK&CO 01 MK 1 - Years 2021-2026
Part: Seat

We explain, supported by the images of the video tutorial attached here, how to adjust the position of the front seat of the Linkeco 01 car. It does not happen manually, but electronically through the appropriate buttons, so let's find out what to do: with the instrument panel on, we can obtain the desired position of the seat by pressing the buttons installed on the driver's door, or on the seat itself, always of the driver, noticing how progressively it rises or lowers, the backrest tilts and even we can, always of the aforementioned seat, set the inclination forward or backward.

Posted on 29 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Seat and Wing Mirror on the Lynk&Co 01
How to Adjust the Seat and Wing Mirror on the Lynk&Co 01
LYNK&CO 01 (2021-2026 / MK 1) This guide will show you how to adjust the front seat and the external wing mirror of the Lynk&Co 01. First, get into the vehicle and start adjusting…
Can You DIY Replace the Brake Discs of the LINK&CO Car?
Can You DIY Replace the Brake Discs of the LINK&CO Car?
LYNK&CO 01 (2021-2026 / MK 1) The topic covered in this video is of fundamental importance, as it significantly affects your safety and that of others while driving any make and m…
How to Charge the Battery of the Lynk&Co 01
How to Charge the Battery of the Lynk&Co 01
LYNK&CO 01 (2021-2026 / MK 1) In simple and quick steps, you will see how to prepare the vehicle for charging the battery of the Lynk&Co. First, position yourself at the charging …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos