Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Genio
    4. : Checks and maintenance

Mahindra Genio - Checks and maintenance

Mahindra Genio (2011-2016 / MK 1)
Where to find the identification codes of the Mahindra Genio?
If we are interested in knowing the exact position in which the identification codes of our Mahindra Genio are marked, such as the chassis number, we can watch …read all…
Posted on 8 September 2022 by ScegliAuto
Mahindra Genio (2011-2016 / MK 1)
How do you unlock the Mahindra Genio immobilizer?
In order to unlock the Mahindra Genio immobilizer, a diagnostic tool must be connected to the vehicle's OBD port: this is positioned immediately under the …read all…
Posted on 1 May 2024 by ScegliAuto
Checks and maintenance (2) Mass air flow sensor (1) Air filter (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos