Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Identification Codes for the Mahindra Genio?

Model: Mahindra Genio MK 1 - Years 2011-2016
Part: Checks and maintenance

If you want to know the exact location of the identification codes for your Mahindra Genio, such as the VIN, you can watch this video to learn how to locate them. The first code is found on the frame, near the front wheel. Other identification codes are located in the cabin, on the driver's side. These are found beneath the driver's pedals and are only visible after lifting the carpet and mat. These codes are very important because they contain all the information about the vehicle and help ensure you get the right replacement parts.

Updated on 12 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Unlock the Immobilizer of the Mahindra Genio?
How to Unlock the Immobilizer of the Mahindra Genio?
Mahindra Genio (2011-2016 / MK 1) To unlock the immobilizer of the Mahindra Genio, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. After c…
How to Remove the Mass Air Flow Sensor from the Mahindra Genio
How to Remove the Mass Air Flow Sensor from the Mahindra Genio
Mahindra Genio (2011-2016 / MK 1) In this video tutorial, you will see how to remove the mass air flow sensor from the Mahindra Genio, following the instructions below. First, open th…
How to Decorate the Cabin of Your Mahindra Genio
How to Decorate the Cabin of Your Mahindra Genio
Mahindra Genio (2011-2016 / MK 1) If you have some colorful fabric scraps and fringes, you can have fun assembling them harmoniously to create a cover for the roof of your Mahindra, j…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos