Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Genio
  6. : How to remove the mass air flow sensor of the Mahindra Genio

Mahindra Genio - Video tutorial

Model: Mahindra Genio MK 1 - Years 2011-2016
Part: Mass air flow sensor
Operation: How to remove the mass air flow sensor of the Mahindra Genio

In this video tutorial we will see how to disassemble the mass / air sensor or mass / air sensor of the Mahindra Genio, following the instructions below. First of all we open the bonnet of our car, pulling the lever from the inside and we begin to disconnect the electrical connector of our mass air flow sensor, pressing on the tab; then we go to disconnect the air intake sleeve from our sensor, unscrewing the screws of the clamps, as shown in the video. At this point we replace our mass air flow sensor with the new one, with the original spare part; we just have to reassemble everything!


Posted on 5 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos