Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. : Genio

Mahindra Genio - Videoguide

Mahindra Genio (2011-2016 / MK 1)
How to replace the air filter on the Mahindra Genio
To replace the engine air filter, proceed as follows: open the bonnet, on the left side locate the box containing the filter. Using a hex wrench, unscrew the …read all…
Posted on 25 October 2022 by ScegliAuto
Mahindra Genio (2011-2016 / MK 1)
How to adorn the interior of the Mahindra Genio
If you have colored scraps of fabric and fringes you can have fun assembling them together in a harmonious way to create a cover for the roof of your Mahindra …read all…
Posted on 24 September 2022 by ScegliAuto
Mahindra Genio (2011-2016 / MK 1)
Where to find the identification codes of the Mahindra Genio?
If we are interested in knowing the exact position in which the identification codes of our Mahindra Genio are marked, such as the chassis number, we can watch …read all…
Posted on 8 September 2022 by ScegliAuto
Mahindra Genio (2011-2016 / MK 1)
How to remove the mass air flow sensor of the Mahindra Genio
In this video tutorial we will see how to disassemble the mass / air sensor or mass / air sensor of the Mahindra Genio, following the instructions below. First …read all…
Posted on 19 April 2022 by ScegliAuto
Mahindra Genio (2011-2016 / MK 1)
How do you unlock the Mahindra Genio immobilizer?
In order to unlock the Mahindra Genio immobilizer, a diagnostic tool must be connected to the vehicle's OBD port: this is positioned immediately under the …read all…
Posted on 1 May 2024 by ScegliAuto
Checks and maintenance (2) Mass air flow sensor (1) Air filter (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos