Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter of the Mahindra Genio

Model: Mahindra Genio MK 1 - Years 2011-2016
Part: Air filter

To replace the engine air filter, follow these steps: open the hood, and on the left side, locate the box containing the filter. Use a hex wrench to remove the nuts securing the cover on the sides of the box. Lift the cover and remove the filter. Take the new filter after verifying that it is suitable for your vehicle (refer to the owner's manual) and place it in the housing. Then, reposition the box cover and tighten the nuts again. Finally, close the engine compartment.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mahindra Genio (2011-2016 / MK 1) In this video tutorial, you will see how to remove the mass air flow sensor from the Mahindra Genio, following the instructions below. First, open th…
Mahindra Genio (2011-2016 / MK 1) To unlock the immobilizer of the Mahindra Genio, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. After c…
Mahindra Genio (2011-2016 / MK 1) If you want to know the exact location of the identification codes for your Mahindra Genio, such as the VIN, you can watch this video to learn how to…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos