Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Mahindra Thar
    4. : Cabin air filter

Mahindra Thar - Cabin air filter

Mahindra Thar (2020-2024 / MK 2)
How to replace the cabin filter of the Mahindra Thar 2021.
If you need to replace the cabin air filter on your Mahindra Thar Mk2 (year 2021) by yourself but don't know how to do it, then you just need to read this new …read all…
Posted on 21 January 2024 by ScegliAuto
Mahindra Thar (2020-2024 / MK 2)
How to replace the cabin filter in Mahindra Thar?
Replacing the cabin air filter in your Mahindra Thar, as we can see in this tutorial, is an extremely simple and fast operation. First of all, position …read all…
Posted on 16 November 2022 by ScegliAuto
Mahindra Thar (2010-2020 / MK 1)
How to replace the cabin air filter on the Mahindra Thar
If we have noticed that the air flow rate of the air conditioning system has decreased considerably, it is probably time to replace the cabin air filter. To do …read all…
Posted on 2 June 2022 by ScegliAuto
Key (2) V-belt (1) -board computer (1) Checks and maintenance (2) Headlight (1) Air filter (1) Cabin air filter (3) Clutch (1) Grille (1) Antifreeze liquid (1) Engine (1) Engine oil (2) Instrument cluster (1) Fuse box (2) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos