Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv700
  6. : How to reset the service in the Mahindra XUV700?

Mahindra Xuv700 - Video tutorial

Model: Mahindra Xuv700 MK 1 - Years 2021-2024
Part: Checks and maintenance
Operation: How to reset the service in the Mahindra XUV700?

In this tutorial we can see how to reset the service in the Mahindra XUV700, a very simple and fast operation, to be performed only after completing all the required maintenance work. First of all we insert the key leaving it in the initial position, after which we hold down the "OK" button, placed next to the "SET" button on the right side of the steering wheel, and at the same time turn on the instrument panel. At this point we keep the key pressed for about 5 seconds, until the complete initialization of the panel. We check that the procedure has been successful in the "Alert history" section in the main menu.


Posted on 5 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos