Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on Mahindra Bolero

Model: Mahindra Bolero MK 1 - Years 2000-2022
Part: Air filter

In this video tutorial, you can see how to replace the air filter on a Mahindra Bolero by following a few simple steps. The first thing to do is purchase a new cabin air filter. Next, get inside the vehicle, turn off the engine, and engage the parking brake. Pull the hood release lever and lift the hood, securing it with the prop rod. The air filter is located on the left side of the engine compartment; you can see the filter box connected to the intake tube. Disconnect the connector, loosen the clamp holding the intake tube in place, and remove the screws securing the air filter box using a Phillips screwdriver. Remove the box and cover the intake tube with a clean cloth to prevent dust from entering the system. Remove the old filter and clean the inside of the filter box with an air compressor; place the new filter and reassemble the parts in reverse order.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mahindra Bolero (2000-2022 / MK 1) Before learning how to replace the air filter of the Mahindra Bolero, remember that this maintenance task must be done with the engine off and cold f…
Mahindra Bolero (2021-2026 / MK 2) In this tutorial, you will see how to replace the fuel filter on a Mahindra Bolero, a very simple and quick operation. First, open the hood and locat…
Mahindra Bolero (2000-2022 / MK 1) In this tutorial, you will see how to remove, clean, or replace the cabin air filter in the Mahindra Bolero, a very simple and quick operation. First…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos