Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Quanto
    4. : How to replace the Mahindra timing chain How much?

Mahindra Quanto - Video tutorial

Model: Mahindra Quanto MK 1 - Years 2012-2020
Part: Timing belt
Operation: How to replace the Mahindra timing chain How much?

The operation of replacing the timing chain on the Mahindra How much is done by extracting the engine from its housing compartment: to do this it will be necessary to loosen the screws that secure it to the supports and disconnect the connectors connected to it. Then, on the left side of the engine block, it will be possible to identify the chain, which can be removed from its crowns by loosening the bolts that secure the chain tensioners. Its tension will then be reduced, allowing it to be extracted and replaced with a new one: in this way, the chain tensioners can be fixed again and the engine mounted again.


Posted on 17 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos