Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Kuv100
    4. : How to clean or replace the Mahindra Kuv100 cabin air filter

Mahindra Kuv100 - Video tutorial

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Cabin air filter
Operation: How to clean or replace the Mahindra Kuv100 cabin air filter

To replace the Mahindra air filter, the first step is to open the dashboard glove compartment (passenger side). Then press in on the sides of the drawer and remove it from its compartment. Now extract the filter box by pulling it outwards. At this point if you decide to clean it, all you have to do is immerse it in a container with soap. One piece of advice is to use neutral soap that does not have aggressive or toxic agents. Now dry the filter well either with a cloth or even better using a compressor without damaging it. Finally, when it is dry, you can insert the filter in its seat and mount the glovebox in its compartment. If, on the other hand, you want to replace it, just take the time to extract the old one and insert the new one, making sure it is of the same model.


Posted on 18 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos