Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Kuv100
  6. : How to replace the diesel filter in the Mahindra KUV100?

Mahindra Kuv100 - Video tutorial

Model: Mahindra Kuv100 MK 1 - Years 2016-2023
Part: Diesel filter
Operation: How to replace the diesel filter in the Mahindra KUV100?

In this tutorial, we can see how to replace the diesel filter in the Mahindra KUV100, a very simple and quick operation. First of all, make sure that the engine is completely cold, then open the hood, remove the air filter box by unscrewing the screws and locate the diesel filter, located between the battery and the engine. Once this is done, disconnect the sensor connector, disconnect both pipes and unscrew the two fixing bolts of the housing. At this point, we can proceed with the replacement of the filter, being careful to also insert a new gasket.


Posted on 20 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos